PAF - Power Amp Front-end

$42.00

Availability:
In Stock
Product Code:
PAF

Description

PAF is the classic power amp front-end used by London Power in all of its amps, and in hifi amps since the 1940s.

  • use any 12A_7: T,U,Y,X or ECC-81,-82,-83
  • can be used for PP or SE
  • local decoupling and feed-through
  • up to 450V plate suply
  • 7-pages of installation notes

A standard 9-pin dual-triode of the 12A_7 type provides an input stage and a concertina splitter. For push-pull, PAF will produce the highest cleanest output with 12AT7, or use a 12AX7 for a British feel The input stage accommodates negative feedback, and for guitar applications also allows for a 'presence' control and various positions for rmaster volumes.

PAF can be used as the front-end for a single-ended (SE) amp with the concertina stage used as a buffer to drive parallel output tubes. Combine PAF with PX66 or with hand-wired power tube sockets.

PAF can be used as the "preamp" for a Champ-style amp with the concertina stage wired for gain instead.

PAF's stages can be used independently wired as the front end of a stereo SE amplifier.

The board is silk-screened on both sides allowing "reversible" construction. This accommodates internal tubes with the tubes and components on the same side of the PCB, or external tubes where the tube and components are on opposite sides of the board.

Note that the combination of PAF and PX66 is the PA66 or PA66SE - the latter are the same PCB but with different wiring notes.

Power requirements: 160-450Vdc at 3mA, plus 6V - 300mA or 12V - 150mA AC or DC.

Kit requires assembly.

PCB size: 1.95" x 2.4" (50 x 61mm)

About London Power

London Power was founded in 1990 by Kevin O'Connor, after two decades of research into innovative audio amplification techniques. Kevin is an audio designer, author and speaker, known for his proprietary methodology called Power Scaling, and for his eleven books on audio subjects. Whether you seek amps, kits or information, you'll find useful answers here on not just the "how" but the "why" of audio amplifier design. Please enjoy the information on this site, and don't hesitate to contact us with questions.

Contact Us

(807) 473-0952
11 am - 6 pm, M-F
amps@londonpower.com
PO Box 10012, Thunder Bay, ON P7B 6T6 CANADA