QRK-LED - Four LEDs for Amp Panel

$12.00

Availability:
In Stock
Product Code:
QRK-LED

Description

QRK-LED is an assembly of four LEDs on a PCB. This can be supported atop QRK-SW for a clean, modern appearance, or can be tied to the amplifier front panel using two brackets.

QRK-LED includes four 3mm round green LEDs.

The LEDs can be completely independent in their wiring to whatever circuit drives them, or they may be used in a common-anode configuration, or wired in series with taps available for current-steering control. Six links provide this versatility, typically installed three at a time. This allows the LED driver circuitry on QRK-LATCH, QRK-FET, QRK-RLY and QRK-VX to all be accommodated.

QRK-LED assembly is easy with its high-quality PCB and kit notes.

PCB size: 1.8 x 0.9", 46 x 23mm

About London Power

London Power was founded in 1990 by Kevin O'Connor, after two decades of research into innovative audio amplification techniques. Kevin is an audio designer, author and speaker, known for his proprietary methodology called Power Scaling, and for his eleven books on audio subjects. Whether you seek amps, kits or information, you'll find useful answers here on not just the "how" but the "why" of audio amplifier design. Please enjoy the information on this site, and don't hesitate to contact us with questions.

Contact Us

(807) 473-0952
11 am - 6 pm, M-F
amps@londonpower.com
PO Box 10012, Thunder Bay, ON P7B 6T6 CANADA