Kits and Mods TUT5 Standard Amp Kits The "Standard" tube amp project described in The Ultimate Tone Vol. 5 (TUT5) provides every popular guitar amp feature in a compact chassis, including: 2-channel foot-switchable preamp series-parallel effects loop reverb with separate controls for each channel 4-tube 50W power amp separate triode-pentode switches for each power tube fixed-cathode bias switching for each push-pull pair Power Scaling output 0-50W Sustain (sag) control for variable rectifier effect The packages below are designed to make it easy to construct this project for yourself, using TUT5 as your guide! About London Power Kits

T5-C TUT5 Standard - Complete (this product is currently being redesigned)

T5-H TUT5 Standard - Hard Parts $300

For the hobbyist with a typical parts inventory, we offer just the "hard to locate" parts and the components with special characteristics required for the TUT5 Standard amp project. This includes: all semiconductors meter tip pin jacks Power Scale pot Sustain pot card-mounted fuse holders reverb driver transformer line output transformer specific Rs and Cs IEC power entry socket

T5-S TUT5 Standard - Semiconductors only $56

For the hobbyist who can source most parts but wants the semiconductors from one source. This kit includes all of the diodes, zeners, transistors and fets used in the TUT5 Standard tube amp project.

Back to Kits

Ordering Information

LONDON POWER
1020 DAWSON RD, PO BOX 23011
THUNDER BAY, ONTARIO, CANADA  P7B 6P1
807-473-0952
e-mail: amps@londonpower.com